F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
9. Clean the O-ring seal grooves with a 300 mm (12 inch) length of natural fiber string.
-
Loop the string around the grooves and pull the string back and forth.
10. Remove any foreign material from the grooves with a lint-free cloth.
CONNECT
1. Install the spring lock coupling spring.
2. Lubricate the inside of the coupling with mineral oil.
3. CAUTION: Use only the new O-ring seals. The use of any O-ring seals other than those specified in the Ford Master Parts Catalog may
result in intermittent leakage during vehicle operation.
Install the O-ring seals.
-
Lubricate the O-ring seals with mineral oil.