F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Intake Air Temperature Sensor: Service and Repair
INTAKE AIR TEMPERATURE (IAT) SENSOR
REMOVAL
1. CAUTION: Make sure the ignition switch is in the OFF position prior to working on the electronic engine controls.
Turn the ignition switch to the OFF position.
2. NOTE: Fuel line disconnected for clarity.
Disconnect the intake air temperature (IAT) electrical connector and wiring harness retainer.
3. Remove the IAT sensor.
INSTALLATION
1. To install, reverse the removal procedure.