F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
OVERVIEW
The 2004 model year program involves replacing the exhaust pressure (EP) sensor and connector and recalibrating the powertrain control module
(PCM), transmission control module (1CM) and the fuel injection control module (FICM) with the latest software.
EP SENSOR AND CONNECTOR REPLACEMENT
NOTE:
All splices are to be made using tools provided in the Rotunda Wire Splice Tool Kit 164-R5903.
The repair kit contains the connector and pigtails, butt splice connectors and heat shrink tubing.
The EP sensor is located on a bracket above the left valve cover in front of the glow plug relay.