F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
To install, reverse the removal procedure.
2. Check the restraint system for correct operation.
Front 40/20/40 Seat, Center
SAFETY BELT - FRONT 40/20/40 SEAT, CENTER
REMOVAL
1. Remove the cap from the safety belt buckle nut.
2. Remove the safety belt buckle.
1
Remove the safety belt buckle nut.
2
Remove the safety belt buckle.
3. Remove the cap from the safety belt nut.
4. Remove the safety belt tongue.
1
Remove the safety belt nut.
2
Remove the safety belt.
INSTALLATION
NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Make sure to tighten nuts to specification.