F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
2
Push the sides of the seat backrest trim panel together and release the retaining clips (see inset for location).
3
Slide the seat backrest trim panel down, releasing the upper retainers and remove the seat backrest trim panel.
8. Release the seat backrest trim cover J-clips.
9. NOTE: The inboard and outboard tower cap covers are not interchangeable.
Remove the inboard, outboard and front tower cap screw covers. Remove four tower cap attachment screws.
10. NOTE: Observe the retainer bracket orientation.
Remove the screws and the bracket.
11. Using an appropriate pry tool, separate and remove the outer and front safety belt web guides.