F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
2. Install the safety belt buckle pretensioner and usage detection switch electrical connectors to the seat cushion pan.
3. Restore the vehicle to operating condition.
1
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, notes, and instructions in the seat removal
and installation procedure.
Install the seat on the side with the affected safety belt buckle and pretensioner.
2
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, notes, and instructions in the supplemental
restraint system deactivation/reactivation procedure.
Reactivate the supplemental restraint system (SRS).
3
WARNING: The restraint system diagnostic tool is for restraint system service only. Remove from the vehicle prior to road use.
Failure to remove could result in injury and possible violation of vehicle safety standards.
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS). See: Air Bag(s) Arming and
Disarming/Service and Repair/Prove Out Procedure
4
Check the active restraint system for correct operation.
