F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
Brake Light Switch: Service and Repair
LAMP SWITCH - BRAKE PEDAL POSITION (BPP)
REMOVAL
1. Disconnect the battery ground cable.
2. Disconnect the brake pedal position (BPP) switch electrical connector.
3. Remove the BPP switch.
1
Remove the self-locking pin.
2
Remove the BPP switch from the brake master cylinder push rod.
3
Remove the brake master cylinder push rod spacer.
4
Remove the brake master cylinder push rod bushing.
INSTALLATION
1. To install, reverse the removal procedure.