F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
1. To Install, follow the removal procedure in reverse order, using new fasteners.
Stabilizer Bar and Link - Dana Axle
Stabilizer Bar and Link - Super Duty F-350, Dana Axle
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in
major service expense. Install new parts with the same part number or an equivalent part if installation is necessary. Do not use an installation part of
lesser quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts.
NOTE: Super Duty F-350 Wide Frame shown, Super Duty F-350 Narrow Frame similar.
1. Raise and support the vehicle.
2. Remove the nuts from both lower ends of the stabilizer bar links and remove the washers.
