F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
4x4 vehicles
2. Remove the transfer case.
4x2 vehicles
3. Remove the rear driveshaft.
4. Remove the transmission insulator-to-crossmember support nuts.
5. Attach a suitable transmission Jack to the transmission.
6. CAUTION: Be sure not to raise the back of the transmission too high. If it makes contact with the underbody, damage to the TSS and OSS
sensors will occur.
Remove the rear transmission mount.
1
Raise the transmission up off the rear crossmember support.
2
Remove the bolts.
3
Remove the rear transmission mount.
7. Disconnect the Output Shaft Speed (OSS) sensor.
