ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Transmission Mode Switch, A/T > < 4R100 Automatic Transmission|Page 7604
Page 13
background image

2. CAUTION:  Damage will occur to the rubber-coated sealing washers and transmission fluid will leak if the cooler line case fitting are

over-tightened.

NOTE:  Align the rubber-coated sealing washers while installing CBV assembly on the transmission case.

Install the CBV assembly.

3. Install the fluid cooler tubes in the front and rear cooler line case fittings.

4. CAUTION:  Do not use any fluid approved for MERCON V application. Using a fluid rated for MERCON V may cause internal damage in

MERCON only applications.

MERCON ATF is being replaced by MERCON V ATF as a service fluid, per TSB 06-14-4..

Fill the transmission with the specified type and quantity of transmission fluid.

5. Check for leaks.

Transmission Mode Switch, A/T > < 4R100 Automatic Transmission|Page 7604