F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
3. Position the clutch disc on the flywheel and the clutch alignment tool in the pilot bearing to align the clutch disc.
^
The 5.4L/6.8L engines accept a 1 1/4 inch input shaft.
^
The 6.0L engines accept a 1 3/8 inch input shaft with 0.98 inch pilot bearing inner diameter.
^
The 7.3L engines accept a 1 3/8 inch input shaft with 0.67 inch pilot bearing inner diameter.
4. NOTE: Align the index marks if installing the original clutch pressure plate and flywheel.
Install the clutch pressure plate.
1
Position the clutch pressure plate on the dowels.
^
The diesel engine flywheel has two dowels. The gasoline engine flywheel has three dowels.
2
Using a clutch alignment tool, align the clutch disc and the pressure plate.
3
Install the bolts and tighten in a star pattern sequence.
4
Remove the special tool.
5. Install the transmission.
6. Test the system for normal operation.