F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
6. NOTE: Apply only a light oil film on the pinion bearings before assembling the tool.
Assemble and position the special tools.
7. NOTE: This step duplicates final pinion bearing preload.
Tighten the Handle to achieve the specified rotational torque.
8. NOTE: The special tool must be offset to obtain an accurate reading.
Rotate the special tool several half-turns to ensure proper seating of the pinion bearings, and position the special tool.
9. Install the special tool.
1
Position the special tool.
2
Install the differential side bearing caps.
3
Install the differential side bearing cap bolts.