F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
32. Using the special tool, remove the pinion flange.
33. Coat the pinion seal rubber lips with the specified fill lubricant.
34. Using a suitable driver, install the differential pinion oil seal.
35. Coat the inner splines of the pinion flange with lubricant.
36. Using the special tool, install the pinion flange.
37. CAUTION: Always use a new washer and locknut.
Install the new washer and locknut. Torque to specification.
38. Install the outboard spacers in the side from which they were removed.