F 350 4WD Super Duty V8-6.0L DSL Turbo VIN P (2004)
1. Install the inner shift lever boot ring into the shift lever boot.
2. Install the shift lever boot into the special tool.
Apply silicone lubricant to the shift lever boot.
3. Position the shift housing on a vice. Using the special tools, install the shift lever boot into the shift housing.
4. Install the lower gearshift lever and gearshift lever blocks into the shift housing.
Install the gearshift lever blocks with the notches facing downward.
5. CAUTION: Do not use a silicone sealing compound.
NOTE: Do not wait longer than ten minutes to tighten the bolts due to the rapid cure time of the sealant.
Install the shift housing.
^
Apply gasket maker to the sealing surfaces.