Workshop Repair Manuals

Ford Workshop Manuals

[NEXT PAGE]

ford Workshop Repair Guides


F 350 4WD Super Duty V8-6.2L Flex Fuel (2011)

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Communications Control Module > Component Information > Technical Service Bulletins > Customer Interest for Communications Control Module: > 10-22-2 > Nov > 10 > Electrical - Unitiated Electrical Systems Activation

Page 1
background image

Communications Control Module: Customer Interest
Electrical - Unitiated Electrical Systems Activation

TSB 10-22-2

11/22/10

6.2L - UNINITIATED ACTIVATION OF MYKEY, PANIC
ALARM OR SYNC 911 ASSIST FEATURES - BUILT
ON OR BEFORE 9/212010

FORD:
2011 F-250, F-350

ISSUE
Some 2011 F-Super Duty vehicles equipped with a 6.2L engine and built on or before 9/2/2010 may exhibit uninitiated activation of any MyKey
features, radio volume limited, vehicle speed limited to 80 MPH (129 Km/h) or panic alarm features such as flashing lights, hazard lamps, horn
activation, or SYNC 911 Assist.

ACTION
Follow the Service Procedure steps to correct the concern.

SERVICE PROCEDURE

Replace the powertrain control module (PCM). Refer to Workshop Manual, Section 303-14A.

Please advise the customer that this vehicle is equipped with an adaptive transmission shift strategy which allows the vehicle's computer to learn the
transmission's unique parameters and improve shift quality. When the adaptive strategy is reset, the computer will begin a relearning process. This
relearning process may result in firmer than normal upshifts and downshifts for several days.

Parts Block

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

102202A

2011 F-Super Duty 250,

0.8 Hr.

350 6.2L: Replace The
PCM Includes Time To
Reprogram PCM And 2
PATS Keys (Do Not Use
With Any Other Labor
Operations)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

12A650

42

Disclaimer

Relays and Modules > Relays and Modules - Accessories and Optional Equipment > Communications Control Module > Component Information > Technical Service Bulletins > Customer Interest for Communications Control Module: > 10-22-2 > Nov > 10 > Electrical - Unitiated Electrical Systems Activation

[NEXT PAGE]