F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
3.
Remove the outer window molding weather strip assembly by lifting it up away from the flange (Figure 1).
4.
Raise the side door glass completely.
5.
Measure the distance from inboard sur[ace of the door molding flange to outboard surface of the window glass (Figure 2). Distance from flange to
glass should be between 5/8-3/4" (16-19 mm) for F-Super Duty and Excursion, and 3/16-7/16" (5-11 mm) for Expedition and Navigator.
6.
Lower glass completely.
7.
Adjust the door molding flange to meet the 5/8-3/4" (16-19 mm) dimension. Do not adjust flange more than 3/4" (19 mm) away from the glass.
8.
Install a new lower window molding weather strip assembly.
9.
Reinstall mirror.
10.
If the side door glass has been scratched, replace the glass. Refer to Workshop Manual, Section 501-11.
