F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
6. Loosen the rear glass run bolt.
-
To install, tighten to 13 Nm (10 lb-ft).
7. Remove the front door window glass from the channel by sliding the channel forward, then position the door glass in the bottom of the door.
8. Remove the window glass from the inner door by tilting the window glass forward and lifting the glass out of the door.
9. NOTE: Make sure the door glass is seated in the glass run channel and the rear glass run bolt is positioned all the way forward prior to tightening
the rear glass run bolt.
To install, reverse the removal procedure.
