F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Part 2
Removal and Installation
1. NOTE: The window must be in the raised position.
Remove the exterior door handle.
2. Release the lock linkage guide clip from the rear door.
3. Release the clip and disconnect the door lock actuating rod from the latch.
4. Release the clip.
5. Remove the 3 screws and position the rear door latch aside.
-
To install, tighten to 12 Nm (106 lb-in).
6. Remove the rear door latch actuating cable water seal.
