F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
10. Remove the driver side cowl side trim panel.
11. Remove the 3 parking brake control nuts, and position the parking brake control aside.
-
To install, tighten to 25 Nm (18 lb-ft).
12. Remove the E-clip, release the return spring and position the hood latch release handle aside.
13. Disconnect the primary hood latch release cable A from the hood latch release handle.
14. Remove the primary hood latch release cable A through the engine compartment.
15. To install, reverse the removal procedure.