ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Recall - Seat Back Pivot Weld Non-Compliance|Page 12552 > < Recall - Seat Back Pivot Weld Non-Compliance|Page 12550
Page 4
background image

2.

On regular cab vehicles only, remove the latch handle on the back of the seat using a clean, suitable tool. See Figure 1.

3.

Open the J-clip on the seat back using a flat-blade screwdriver. See Figure 2.

Recall - Seat Back Pivot Weld Non-Compliance|Page 12552 > < Recall - Seat Back Pivot Weld Non-Compliance|Page 12550