F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
4.
Roll the seat back trim upward, while unseating the hook-and-loop strips by hand, to the first row of hog rings. Do not go past the first row of hog
rings. See Figure 3.
5.
Pull the foam and seat back trim assembly up over the seat back frame to remove. See Figure 4.
NOTICE:
The silk film bag will be reused, use care not to tear the silk film bag during removal. The purpose of the silk film bag is to provide a barrier between
the foam and seat back to prevent squeaks.
