F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
-
To install, tighten to 50 Nm (37 lb-ft).
4. Remove 4 spacer-to-cushion frame bolts and spacers.
-
To install, tighten to 50 Nm (37 lb-ft).
5. Release the cushion trim cover J-clips attached to the cushion frame and remove the cushion trim cover and cushion foam pad.
6. Invert the cushion trim cover, remove the 2 rows of hog rings and separate the cushion trim cover from the cushion foam pad.
7. To assemble, reverse the disassembly procedure.
Bucket Seat
SEAT CUSHION - REAR, CREW CAB, BUCKET SEAT
Crew Cab Bucket Seat Cushion (Part 1)
