F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
1. Remove the wheel and tire.
2. Remove the brake caliper flow bolt and position the brake flexible hose aside.
^
Discard the 2 copper washers.
3. Remove the 2 brake caliper bolts and the brake caliper.
Installation
1. CAUTION: Tighten the bottom caliper bolt before tightening the top caliper bolt or damage to guide pins may occur.
CAUTION: Make sure the caliper pin boots are correctly seated to prevent damage to guide pins.
Position the brake caliper and install the 2 brake caliper bolts.
^
On F-250, F-350, tighten to 76 Nm (56 lb-ft).
^
On F-450, F-550, tighten to 63 Nm (46 lb-ft).
2. Using 2 new copper washers, position the brake flexible hose and install the brake caliper flow bolt.
^
Tighten to 48 Nm (35 lb-ft).
3. Bleed the brake caliper.
4. Install the wheel and tire.
5. Test the brake system for normal operation.