F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Coolant Reservoir: Service and Repair
Coolant Expansion Tank
COOLANT EXPANSION TANK
Removal and Installation
1. Drain the fuel and turbocharger cooling system.
2. Disconnect the fuel cooler-to-coolant expansion tank hose from the coolant expansion tank.
3. Disconnect the coolant expansion tank-to-turbocharger actuator cooler hose from the coolant expansion tank.
4. Remove the bolts and the coolant expansion tank.
-
To install, tighten to 9 Nm (80 lb-in).
5. To install, reverse the removal procedure.
-
Fill and bleed the fuel and turbocharger cooling system.
