F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
3. NOTE: Do not turn the crankshaft while carrying out this procedure.
Install and remove the crankshaft main bearing cap.
4. Verify the crankshaft journal clearance.
Crankshaft End Play
Special Tool(s)
NOTE: Refer to the appropriate information for the specification.
1. Using the Dial Indicator Gauge, measure the crankshaft end play.
2. Position the crankshaft to the rear of the cylinder block.
3. Zero the indicator.
4. Move the crankshaft to the front of the cylinder block. Note and record the crankshaft end play.
