F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
21. Position back the transmission cooler tubes on the stud and install the nut.
^
Tighten to 9 Nm (80 lb-inch).
22. CAUTION: Only use hand tools when installing the transmission mount retaining nuts or damage to the transmission mount may occur.
Install the new transmission mount retaining nuts.
^
Tighten to 115 Nm (85 lb-ft).
23. CAUTION: Only use hand tools when installing the engine mount retaining nuts or damage to the engine mount may occur.
Install the new LH engine mount retaining nuts.
^
Tighten to 200 Nm (148 lb-ft).