F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
15. Install new body bolts.
^
Tighten to 90 Nm (66 lb-ft).
16. NOTE: RH side shown, LH side similar.
If equipped, install the running boards and bolts.
^
Tighten to 13 Nm (115 lb-inch).
17. Tighten the center bolt for the LH motor mount.
^
Tighten to 350 Nm (258 lb-ft).
18. Connect the retaining clip for the transmission cooler tubes at the frame.
