F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
1. CAUTION: In the event of catastrophic engine failure, always install a new oil cooler assembly (with oil cooler). Foreign material cannot
be removed from the oil cooler and engine damage may occur.
Using new press-in-place gaskets, install the oil cooler cover assembly and 8 bolts.
^
Tighten to 31 Nm (23 lb-ft).
2. CAUTION: Do not discard the oil cooler cover screws. They are self-tapping screws and will be needed to cut the threads in the new oil
cooler cover or engine damage may occur.
Install new press-in-place gaskets, the oil filter base and 10 screws.
^
On new oil cooler cover, tighten to 10 Nm (89 lb-inch).
^
On used oil cooler cover, tighten to 7 Nm (62 lb-inch).
3. Install the turbocharger pedestal.
4. Install the intake manifold.
