F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
3. Install the oil pan and the 20 bolts.
1. Install the 5 longer oil pan bolts.
2. Install the remaining oil pan bolts.
^
Tighten to 13 Nm (115 lb-in).
4. NOTE: Make sure the motor mount studs are aligned with the frame openings.
With the help of an assistant, lower the engine and the body at the same time.
5. Remove the straps and reposition the hoist to the frame of the vehicle.
6. Position the steering shaft into the housing. Install the new steering shaft bolt.
^
Tighten to 48 Nm (35 lb-ft).
7. Position back the master cylinder and bracket. Install the retaining nuts.
^
Tighten to 30 Nm (22 lb-ft).
