F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
8. Position back the transmission cooler tubes on the stud and install the nut.
^
Tighten to 9 Nm (80 lb-in).
9. Position back the ground cable and install the bolt.
^
Tighten to 47 Nm (35 lb-ft).
10. Loosely install the exhaust downpipe bolts.
11. NOTICE: Only use hand tools when installing the transmission mount retaining nuts or damage to the transmission mount may occur.
Remove and discard the transmission mount retaining nuts. Install the new transmission mount retaining nuts.
^
Tighten to 115 Nm (85 lb-ft).
