F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
19. NOTE: Raise the supply tube up to clear the engine coolant temperature (ECT) sensor connector when positioning the power steering pump aside.
Remove the bolts and position the power steering pump aside.
20. NOTE: The front end accessory drive (FEAD) is not removed, it is positioned forward to access the front banjo bolt.
NOTE: It may be necessary to position the accessory drive tensioner to access the lower bolt. Remove the bottom bolt first.
Remove the nuts and bolts and position the FEAD bracket forward.
21. Remove the bolt and the EGR cooler coolant tube.
^
Remove and discard the O-ring seal.
