F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
5. Install the nut on the fuel injector return tube bracket.
^
Tighten to 11 Nm (97 lb-inch).
6. Install the fuel filter module and bolts.
^
Tighten to 13 Nm (115 lb-inch).
7. CAUTION: Only use banjo bolts with a green hex head. The green-headed bolts do not contain a check valve. When viewed from the
inner end, the correct bolt will appear open. Failure to install the correct banjo bolt may result in damage to the high-pressure fuel
injection pump.
Install new copper sealing washers and banjo bolts at the fuel filter module.
^
Tighten the M14 banjo bolt to 47 Nm (35 lb-ft).
^
Tighten the M12 banjo bolt to 38 Nm (28 lb-ft).