F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
15. Position the EGR-OC pipe and install a new EGR-OC pipe-to-horizontal EGR cooler gasket and loosely install the new bolts.
16. CAUTION: Make sure the correct bolts are installed in the bracket or damage to the exhaust gas recirculation (EGR)-oxidation catalytic
converter (OC) pipe may occur.
Install a new EGR-OC pipe-to-RH turbocharger inlet pipe gasket and loosely install new bolts. Loosely install new EGR-OC-to-turbocharger
bracket bolts.
17. Position the cylinder head bracket and install the EGR-OC bracket-to-cylinder head bracket washer and a new bolt. Loosely install the cylinder
head bracket-to-cylinder head washers and a new bolt. Finger tighten both bolts.
18. Tighten the EGR-OC-to-EGR cooler bolts.
^
Tighten to 31 Nm (23 lb-ft).
19. Tighten the RH turbocharger inlet pipe-to-EGR-OC bolts.
^
Tighten to 31 Nm (23 lb-ft).
20. Tighten the EGR-OC-to-turbocharger bracket bolts.
^
Tighten to 31 Nm (23 lb-ft).
