F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Turbocharger Inlet Pipe - RH, 6.4L Diesel (Part 2)
Removal
CAUTION: Do not bend or twist the exhaust gas recirculation (EGR)-oxidation catalytic converter (OC) pipe or damage to the bellow on the
EGR-OC pipe may occur.
CAUTION: Do not bend or twist the turbocharger inlet pipe or damage to the bellow on the turbocharger inlet pipe may occur.
1. Remove the exhaust downpipe.
2. Disconnect the exhaust pressure (EP) sensor tube fitting from the EGR-oxidation catalytic converter (OC) pipe.
3. Remove the EGR-OC pipe bracket-to-cylinder head bracket bolt and washer. Remove the EGR-OC pipe bracket-to-LH cylinder head bolt,
washers and the bracket.
^
Discard the bolts.