F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
12. Position the cylinder head bracket and install the EGR-OC bracket-to-cylinder head bracket washer and a new bolt. Loosely install the cylinder
head bracket-to-cylinder head washers and a new bolt. Finger tighten both bolts.
13. Tighten the EGR-OC-to-EGR cooler bolts.
^
Tighten to 31 Nm (23 lb-ft).
14. Tighten the RH turbocharger inlet pipe-to-EGR-OC bolts.
^
Tighten to 31 Nm (23 lb-ft).
15. Tighten the EGR-OC-to-turbocharger bracket bolts.
^
Tighten to 31 Nm (23 lb-ft).
