ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Duct > < Temperature Blend Door Actuator - RH|Page 10626
Page 2
background image

Removal and Installation

1. Remove the lower steering column opening panel.
2. Remove the 3 defrost/panel/floor mode door actuator screws.
3. Disconnect the defrost/panel/floor mode door actuator electrical connector.
4. Remove the defrost/panel/floor mode door actuator.
5. To install, reverse the removal procedure.

Air Duct > < Temperature Blend Door Actuator - RH|Page 10626