F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Removal and Installation
Both electric heater battery cable assemblies
1. Disconnect the battery.
Underhood electric heater battery cable assembly
2. Remove the engine air cleaner.
3. Remove the underhood electric heater battery cable negative terminal nut.
-
To install, tighten to 9 Nm (80 lb-in).
4. Remove the underhood electric heater battery cable positive terminal nut.
-
To install, tighten to 9 Nm (80 lb-in).
5. Remove the 2 electric heater battery cable dash panel terminal nuts.
-
to install, tighten to 9 Nm (80 lb-in).
6. Detach and remove the underhood electric heater battery cable assembly.
Passenger compartment electric heater battery cable assembly
7. Remove the heater core and evaporator core housing.
8. Remove the electric heater battery cable bracket screw.
9. Remove the 2 heater tube bracket screws.
10. Disconnect and remove the passenger compartment electric heater battery cable assembly.
Both electric heater battery cable assemblies
11. To install, reverse the removal procedure.