F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Blower Motor: Service and Repair
BLOWER MOTOR
Removal and Installation
NOTE: The blower motor vent tube must be completely removed from the blower motor before it can be rotated and disengaged from the heater core
and evaporator core housing.
1. Remove the RH lower instrument panel insulator.
2. Remove the RH lower A-pillar junction box trim cover.
3. NOTE: The carpet below the blower motor must be positioned aside to access the dash panel insulator.
Position the dash panel insulator below the blower motor aside.
