F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Blower Motor Resistor: Service and Repair
BLOWER MOTOR RESISTOR
Removal and Installation
1. Lower the glove compartment.
2. Detach the 2 heater core and evaporator core housing harness electrical connectors from the heater core and evaporator core housing.
3. Disconnect the blower motor resistor electrical connector.
4. Remove the 2 blower motor resistor screws.
5. Remove the blower motor resistor.
6. To install, reverse the removal procedure.
