F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
2. Lubricate the inside of the coupling with PAG oil.
3. CAUTION: Use only the new O-ring seals. The use of any O-ring seals other than those specified in the Ford Master Parts Catalog may
result in intermittent leakage during vehicle operation.
Install the O-ring seals.
4. Connect the spring lock coupling fittings with a twisting motion until the spring lock coupling spring snaps over the flared end of the female
fitting.
5. Install the spring lock coupling clip.
