F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Evaporator Core: Service and Repair
EVAPORATOR CORE
Removal and Installation
NOTE:
-
If an A/C evaporator core leak is suspected, the A/C evaporator core must be leak tested before it is removed from the vehicle.
-
Installation of a new suction accumulator is not required when repairing the air conditioning system, except when there is physical evidence of
contamination from a failed A/C compressor or damage to the suction accumulator.
1. Remove the heater core.
2. Remove the evaporator tube dash panel seal.
3. Remove the 3 evaporator tube bracket screws and the evaporator tube bracket.
4. Remove the evaporator core.
5. To install, reverse the removal procedure.
6. Evacuate, leak test and charge the refrigerant system.