F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Sealed Beam Style Headlamp
Removal and Installation
Aerodynamic style headlamp
1. Remove the headlamp assembly.
Sealed beam style headlamp
2. Remove the bolt, 3 screws and the side lamp/front turn signal lamp housing.
-
Disconnect the electrical connectors.
All headlamp types
3. Rotate the bulb holder counterclockwise approximately one-eighth turn and remove it.
-
Separate the bulb from the bulb holder.
4. To install, reverse the removal procedure.