F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Alignment: Service and Repair
Toe Adjustment
Toe Adjustment - F-250 and F-350 Four Wheel Drive (4WD), F-450, F-550
1. Using alignment equipment and the manufacturer's instructions, measure the toe settings.
^
Refer to Alignment Specifications for optimal alignment settings.
^
If the toe settings are not within specification, go to the next step.
2. Start the engine and center the steering wheel.
3. Turn the engine off and, using a suitable steering wheel holding device, lock the steering wheel in the straight ahead position.
4. Loosen the tie-rod adjuster sleeve nuts.
5. Rotate the center link to the correct toe setting.
6. Make sure that the RH tie-rod end is not misaligned, as shown in image 2. Adjust the position as necessary as shown in image 1.
7. Tighten the tie-rod adjuster sleeve nuts to 55 Nm (41 ft. lbs.).
8. Verify the toe settings and adjust as necessary.
