ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Air Cleaner Fresh Air Duct/Hose: > < Engine - Lack Of Power/Check Air Filter Message
Page 2
background image

6. Attach the snow deflector gasket. Ensure gasket is secured mainly to top of filter and then simply rests on edge of airbox. (Figure 2)

NOTE

THE DEFLECTOR GASKET MUST BE USED IN CONJUNCTION WITH THE WINTER GRILL COVER TO MINIMIZE SHOW
INGESTION.

7. Install airbox cover.

8. Install auxiliary snow tube fully to the white indicator mark.

9. Verify the plastic breather box on the end of auxiliary snow tube does not contact turbocharger heat shields. Auxiliary snow tube push-pin to cowl

must be reinstalled to prevent this.

NOTE

THE WINTER GRILL COVER MUST BE REMOVED WHEN TEMPERATURES ARE GREATER THAN 50° F (10° C) (32° F (0° C) WHEN
TOWING) OR ENGINE DAMAGE CAN RESULT. THE SNOW DEFLECTOR GASKET CAN REMAIN INSTALLED IN THE VEHICLE
YEAR-ROUND.

NOTE

IF YOUR VEHICLE IS OPERATED IN A HEAVY SNOW STORM OR BLOWING SNOW CONDITIONS, THE ENGINE AIR INDUCTION
MAY BECOME PARTIALLY CLOGGED WITH SNOW AND/OR ICE. IF THIS OCCURS, THE ENGINE MAY EXPERIENCE A
SIGNIFICANT REDUCTION IN POWER OUTPUT. AT THE EARLIEST OPPORTUNITY, CLEAR ALL THE SNOW AND/OR ICE AWAY
FROM INSIDE THE AIR FILTER ASSEMBLY. TAKE THE TOP OFF THE ASSEMBLY, LEAVING THE AIR FILTER IN, AND REMOVE
ANY SNOW OR ICE.

WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage 
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.

OPERATION

DESCRIPTION

TIME

100202A

2008-2010 F-Super Duty

0.4 Hr.

6.4L: Install Grill Cover,
Snow Deflector Gasket,
Replace Filter Minder And
Air Filter If Necessary (Do
Not Use With Any Other
Labor Operations)

DEALER CODING

CONDITION

BASIC PART NO.

CODE

9601

55

Disclaimer

All Technical Service Bulletins for Air Cleaner Fresh Air Duct/Hose: > < Engine - Lack Of Power/Check Air Filter Message