F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Explode View
Removal
1. Release the toggle clamps and raise the air cleaner outlet housing.
2. Disconnect the secondary air intake hose from the air cleaner outlet housing and set the housing aside.
3. CAUTION: Do not use a tool to pry the element from the air cleaner housing. Failure to follow this instruction may result in air cleaner
and engine damage.
Pull outboard on the top edge of the air cleaner element and remove the element.
-
Discard the air cleaner element.
Installation
1. NOTE: Make sure the element is positioned inboard of the stop feature in the air cleaner housing.
Position a new air cleaner element into the air cleaner housing.
2. Push the element down and inboard to compress the seal into the air cleaner housing.
3. Connect the secondary air intake hose to the air cleaner outlet housing and position the cover on the air cleaner housing.
4. Secure the 2 toggle clamps.
