ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Firing Order > < Fuel Pressure Release|Service and Repair
Page 2
background image

Install the special tool onto the Schrader valve.

5. NOTE:  Open manual valve slowly to relieve the system pressure. This may drain fuel from the fuel system. Place the fuel in a suitable container.

Open the manual valve on the special tool and relieve the fuel pressure.

6. Install the Schrader valve cap.
7. Connect both battery ground cables.
8. After the repair is complete bleed the fuel system, refer to Fuel System Bleeding - Low Pressure, Diesel Engine or Fuel System Bleeding - High

Pressure, Diesel Engine.

Firing Order > < Fuel Pressure Release|Service and Repair