F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
14. Position the wheel bearing and wheel hub in a vise with protective caps and remove the 4 studs using 2 mounting nuts.
Installation
All vehicles
1. Position the wheel bearing and wheel hub in a vise with protective caps and install the 4 studs using 2 mounting nuts.
2. NOTE: Any time the wheel bearing and wheel hub are removed for any reason, a new O-ring seal must be installed. Failure to do so can cause a
vacuum leak and loss of four wheel drive (4WD) operations.
Install a new wheel bearing and wheel hub O-ring seal.
