F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Removal and Installation
NOTE: This procedure is for gasoline applications only.
1. NOTE: The fuel tank must be drained completely. Upon removal of the fuel pump (FP) module, the tank must be inspected for contamination.
Remove the fuel tank.
2. CAUTION: Clean the fuel tank of any dirt or foreign material before servicing the fuel pump (FP) module. In extreme dirt or dusty
conditions it may be necessary to wash the fuel tank using a water hose. Before removing the FP module, make sure that there is no
residual dirt or foreign material around the FP module flange. If dirt or foreign material enter the fuel tank, damage to the FP module or
other fuel system components may occur.
Clean the area around the FP module mounting flange.
3. Using the special tool, remove the FP module lock ring.
4. CAUTION: The fuel pump (FP) module must be handled carefully to avoid damage to the float arm.
