F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Exhaust Pressure Differential Sensor: Service and Repair
DIESEL PARTICULATE FILTER PRESSURE SENSOR
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. CAUTION: Make sure the ignition switch is in the OFF position prior to working on the electronic engine controls or the vehicle may be
damaged.
Turn the ignition switch to the OFF position.
3. Disconnect the diesel particulate filter pressure sensor electrical connector.
4. Remove the diesel particulate filter pressure sensor bracket nut.
