F 350 4WD Super Duty V8-6.4L DSL Turbo (2008)
Exploded View
Removal and Installation
1. Disconnect the crankcase vent oil separator hose and discard the clamp.
2. Loosen the clamp and disconnect the air cleaner outlet pipe from the turbo charger.
-
To install, tighten to 5 Nm (44 lb-in).
3. Loosen the clamp and disconnect the air cleaner outlet pipe from the air cleaner.
-
To install, tighten to 5 Nm (44 lb-in).
4. To install, reverse the removal procedure.
-
Use a new clamp when connecting the crankcase vent oil separator.
